2016 ZX10R part out... (Suffolk, VA)

[Motokonpo]

Pics are here:  https://postimg.cc/gallery/7h54LvP

Parts are from a 2016 ZX10R. There may be cosmetic blemishes on certain parts and some may need cleaning so see picture link for details or ask me for additional photos. Parts are listed "without" shipping cost (Buyer pays actual shipping). I take cash on local pickup or PayPal (Add 3% if using PayPal). It is "BEST" to TEXT, PM or CALL me if interested at 757-572-4410. Parts are located in Suffolk, VA for local pickup. I no longer race or do track days so I'm selling everything. More parts and stuff for sale forthcoming. Thanks

2,500   Stock Engine with Throttle Bodies, Graves Block Off Plates, NGK plugs (3,366 miles)
1,300   Rear shock - Ohlins TTX MKII KA-931 "Comes with Kyle Racing 0% shock link and extra Ohlins Spring"
        (Setup for 190 lbs Fast Bike Industries)
1,200   Forks with Andreani Superbike "Gas" cartridges (Setup for 190 lbs by Fast Bike Industries)
350   Front Wheel with Rotors (No spacers)
350   Rear Wheel with Rotors (No spacers or cush drive/hub)
300   Main frame (Has small holes on one side where the fairings mount broke off. Still Structurally sound.
        Come with title that's not in my name.
260   Gauge Cluster (3,366 miles)
200   Ohlins Mechatronic Steering Damper "Racing" ECU (Converts the OEM Steering damper to a Race steering
        damper electronically)
60   Ohlins OEM Steering Damper "ECU" control module
80   Ohlins Steering Damper (OEM)
350   Bonamico Rearsets (Complete Kit), Right side needs a foot & Toe peg. Comes with custom "Galfer extended
        brake line, Quickshifter and linkage, and rear master cylinder with reservoir delete"
140   Triple Trees (Top and bottom)
160   Subframe (No plastic undertail)
100   Swingarm (Comes with Kawasaki Racing factory chain guard and Bike Master 8MM Swingarm Spoils)
300    ECU with "Woolich Racing" software (autoblip, etc...)
100    Factory OEM Wire harness
100   OEM "Titanium" headers
120   Fuel pump
140   Front OEM Brembo brake calibers (Left and right)
60   Rear OEM Nissan Brake caliber and bracket (No pads)
100   Gas Tank (Small dent on one side corner) Does not leak.
100   Motion Pro quick turn throttle (Little rash on throttle tube end). Comes with the extra cams
100   GB racing cover set (4 total). Clutch, Alternator and Pulse. Pulse cover has rash and will come with an
        extra rashed Alternator cover.
10   R&G Racing Passenger Peg delete plate
60   Vortex V2 Keyless Gas Cap
50   BMC air filter
75   Armour Bodies Pro Series "Belly pan" fairing
50   Armour Bodies Pro Series "Tail" fairing. Some rash. Will mount with no issues.
30   Armour Bodies Pro Series "Front Tire" fender
120   Driven Sprockets and EK 3D 520X chain set: 17F/41R. Chain will need a new master link
40   Woodcraft Key Delete
80   Graves Quick Turn Progressive "Throttle Tube" (Design to work with stock housing & cables)
50   Driven Captive Wheel Spacers (Front & Rear wheel sets)
140   Attack "Zero Offset" clip ons with bars. Right side bar is rashed on the end.
120   Radiator and fan and EvoTech Radiator Guard. Has small cosmetic dent. No leaks
100   ZX10RR "Racing" exhaust hanger bracket (Came off the RR version)
200   Grave 3/4 WORKS Cat Eliminator "Exhaust"  (Mid-pipe & Can). The muffler has rash but fully functional.
        Will need a can bracket/clamp.
60   Electronic OEM Quickshifter (This was my spare)
80   Front Brake OEM Brembo Master cylinder and reservoir. Rashed lever.
80   Front EBC racing Brake Pads (Complete set) 90% left ( EBC GPFAX447HH)
50   Clutch Purge with full length "CRG" Lever
50    Driver's Seat #1 (No Tears)
30    Driver's Seat #2 (Small tear on the corner)
60    Air Box (No air filter)
10    Coolant Overflow bottle
40    Ram Air intake front. Cracked. Can be repaired with JB Weld
60   Ignition coils (4x)
60   Rectifier
15    Rear wheel axles with adjustment blocks
10    Front wheel axle
15    Front Sprocket cover (Plastic)
10    Tip over switch
20    Front Fairing stay. little rash on ends, but will mount up with no issues.
20    Stock Nissan rear brake pads (80% left)
25    Swingarm "Mud guard"
40    Rear Sprocket hub with Rubber Spacers
25    Plastic undertail (Goes under the subframe)
20    Plastic tank Panels (Left & Right). Some rash on them
30    Plastic Gas Tank Shroud
20    Start/Stop kill switch (Right side)
20    Left side Selector switch (Horn, power mode, etc...)
10    Kick stand switch/sensor
15    AIM solo 2 laptimer Holder
20   Front wheel speed sensor
   
Misc...
100    Pitbull Rear Stand
20    Pitbull Tire Warmers control box stand
20    Trackside Front wheel Stand
30    Harbor Freight Rear Wheel Stand
120    Baxley Sport wheel chock